• nexAir Now
  • What to Consider When Designing Industrial Gas Piping

    Industrial gas supply affects more than purchasing and delivery schedules. It also influences how employees move through a facility, how production equipment is arranged, and how easily an operation can grow.

    For many manufacturers, one important decision is whether to supply gas through individual cylinders at each workstation or use a centralized distribution system serving multiple points of use.

    Both approaches can work well.

    Point-of-use cylinders provide flexibility and relatively simple deployment. Centralized systems can reduce repeated container handling and support permanent production infrastructure.

    The appropriate choice depends on gas consumption, facility layout, operating requirements, and the value of flexibility versus centralized control.

    What Is Point-of-Use Cylinder Supply?

    Point-of-use supply places a gas cylinder or suitable container near the equipment consuming the gas.

    A regulator and other appropriate delivery components provide the required operating conditions.

    This arrangement is common in smaller fabrication shops, maintenance departments, laboratories, and facilities with relatively modest gas requirements.

    Each workstation can operate with its own supply.

    The approach is straightforward, although every location requires appropriate cylinder storage, handling, monitoring, and replacement practices.

    As the number of gas-consuming stations increases, managing individual containers can become more demanding.

    What Is Centralized Gas Distribution?

    A centralized system supplies gas from a common source through a designed distribution network.

    The source may be a manifolded cylinder bank, MicroBulk installation, bulk storage system, or another arrangement appropriate to the gas and application.

    Piping carries gas to designated points of use, where additional regulation or control equipment may be required.

    This approach can reduce the need for individual containers at every workstation.

    However, centralized distribution introduces permanent infrastructure that must be engineered, installed, maintained, and managed.

    The system must provide the correct gas quality, pressure, and flow to all connected users.

    Compare Cylinder Handling

    One of the clearest differences is the amount of container handling required.

    With point-of-use cylinders, employees may need to move, secure, connect, and replace containers throughout the facility.

    That work can become significant when many stations consume gas regularly.

    A centralized system can consolidate much of the supply handling at one location.

    However, the source still requires replenishment and maintenance.

    Manufacturers should measure how much time their current arrangement consumes before assuming centralization will create substantial savings.

    Evaluate Production Flexibility

    Point-of-use cylinders are useful when production layouts change frequently.

    A fabrication shop may move equipment between work areas, introduce temporary stations, or perform maintenance at different locations.

    Portable supply can accommodate those needs without requiring new permanent piping for every change.

    Centralized systems are often better suited to established production areas with relatively predictable equipment locations.

    Although distribution networks can be expanded or modified, those changes require appropriate engineering and installation.

    The facility's expected level of change should influence the decision.

    Consider Gas Consumption

    Consumption is another important factor.

    Low-volume users may not justify the expense of centralized distribution.

    Facilities with many permanent stations consuming the same gas may benefit more from a shared system.

    However, total monthly volume does not provide the entire answer.

    Peak simultaneous demand, required pressure, gas type, and operating schedule also influence the appropriate design.

    A centralized system must be able to support connected equipment during expected operating conditions.

    Understand Pressure and Flow Requirements

    Point-of-use cylinders typically have relatively short delivery paths.

    Centralized systems may move gas across longer piping networks with multiple branches.

    Pressure losses, pipe sizing, regulators, and simultaneous flow all influence performance.

    A system that works with a few stations may become inadequate when additional equipment is connected.

    Manufacturers should evaluate both current demand and realistic expansion requirements.

    Qualified personnel should determine whether the distribution system can maintain the necessary pressure and flow at every point of use.

    Gas Quality Can Influence the Decision

    Not every process can share the same gas distribution system.

    Some applications require specific purity grades or shielding-gas mixtures.

    Others have stricter limits for moisture, oxygen, or other contaminants.

    Centralized distribution must preserve the required gas quality throughout the delivery network.

    Materials, seals, cleaning practices, and other system components can affect suitability.

    Where processes require different gases or incompatible specifications, separate distribution arrangements may be necessary.

    The decision should begin with application requirements rather than infrastructure convenience.

    Reliability and Supply Continuity

    Both supply approaches have reliability considerations.

    Point-of-use cylinders allow individual workstations to operate independently, but each station depends on employees maintaining adequate supply.

    Centralized systems can simplify supply management and support reserve arrangements, but a failure in a shared component may affect several users.

    Manufacturers should consider how an interruption would affect production.

    Depending on the application, backup supply, isolation valves, reserve banks, or other contingency measures may be appropriate.

    Reliability should be evaluated at the system level.

    Safety and Facility Layout

    Gas storage and distribution require appropriate safety planning regardless of the chosen arrangement.

    Point-of-use cylinders need suitable securing, handling, access, and storage conditions.

    Centralized installations introduce requirements involving storage location, piping routes, isolation, pressure control, ventilation, and maintenance access.

    The relevant hazards depend on the gas.

    Oxygen, flammable gases, inert gases, and other products require different precautions.

    Qualified personnel should evaluate the system according to applicable codes, standards, and manufacturer requirements.

    Compare Total Operating Cost

    Point-of-use cylinders may require less initial infrastructure but involve recurring container handling and management.

    Centralized systems can reduce some of those activities while introducing installation, maintenance, and distribution costs.

    Manufacturers should evaluate the full cost of each arrangement.

    Relevant factors include gas consumption, delivery frequency, handling labor, equipment installation, storage space, maintenance, downtime exposure, and future expansion.

    The lowest initial cost may not provide the lowest long-term operating cost.

    Likewise, a centralized system may be unnecessarily complex for a small or highly flexible operation.

    A Hybrid Approach May Work Best

    Some facilities benefit from combining centralized supply with point-of-use cylinders.

    Permanent high-consumption workstations may use a shared distribution system, while maintenance departments or temporary work areas retain portable cylinders.

    Specialty gases may also remain in individual containers when demand is limited or the application requires a separate supply.

    A hybrid arrangement can preserve flexibility without requiring every production area to operate the same way.

    Manufacturers should design around the actual needs of each process.

    How nexAir Helps

    nexAir supports industrial gas customers with cylinders, manifolded systems, MicroBulk, bulk supply, and related gas-delivery equipment for appropriate applications.

    Through nexAir KnowHow, manufacturers can evaluate consumption, facility layout, gas specifications, pressure and flow requirements, and future production needs.

    That broader perspective helps customers compare point-of-use, centralized, and hybrid arrangements based on operational fit.

    Helping Customers Forge Forward

    Manufacturers Forge Forward by selecting gas distribution systems that support how their facilities work.

    Point-of-use cylinders offer flexibility and straightforward deployment. Centralized distribution can simplify supply management for permanent, recurring demand. Hybrid arrangements can combine advantages of both.

    The right decision considers production requirements, gas quality, operating cost, reliability, and future growth.

    When those factors are evaluated together, gas distribution becomes part of a deliberate manufacturing infrastructure strategy.

    nexAir is always open!

    Don't see what you're looking for?

    Everything we offer is a click away and it will arrive before you know it.