• nexAir Now
  • Planning Medical Gas Systems for Ambulatory Surgery Centers

    Ambulatory surgery centers provide surgical care without the same inpatient infrastructure found in a traditional hospital. Their facilities are often smaller, but their medical gas requirements can be just as important to safe clinical operations.

    Medical oxygen, medical air, vacuum, and other gases or services may support anesthesia, surgical procedures, recovery, and specialized equipment.

    Planning these systems requires an understanding of the center's clinical services, expected demand, facility layout, and applicable healthcare requirements.

    A well-designed medical gas system supports reliable care while avoiding unnecessary infrastructure and operational complexity.

    How Medical Gas Needs Differ in Ambulatory Surgery Centers

    Ambulatory surgery centers, commonly called ASCs, have operating patterns that differ from those of hospitals.

    Many centers perform scheduled procedures during defined operating hours rather than providing continuous inpatient care.

    However, gas demand can be concentrated during periods when several operating rooms are active simultaneously.

    The services offered also influence requirements. An orthopedic surgery center may have different equipment and gas needs from an ophthalmology or endoscopy-focused facility.

    Planning should begin with the actual clinical program rather than a generic assumption about the size of the building.

    Identify Required Gases and Services

    The medical gas requirements of an ASC depend on the procedures performed and equipment used.

    Medical oxygen may support anesthesia and patient care. Medical air, vacuum, and other services may also be required.

    Certain clinical applications may use additional gases, depending on equipment and approved procedures.

    The design team should work with clinical leadership and equipment manufacturers to identify requirements for each operating room, procedure space, and recovery area.

    Applicable codes and standards help determine the appropriate infrastructure.

    Not every ambulatory surgery center requires an identical system configuration.

    Evaluate Peak Demand Rather Than Average Consumption Alone

    An ASC may have relatively predictable daily operations, but demand can rise significantly when several procedures occur at once.

    Medical gas capacity should account for appropriate simultaneous-use conditions.

    Designers should evaluate required pressure, flow, source capacity, and distribution performance using applicable engineering criteria.

    Average consumption remains useful for supply planning and replenishment.

    However, it does not establish whether the system can meet the demands of active clinical operations.

    Capacity planning should reflect both total usage and the operating conditions the system must support.

    Choose the Appropriate Supply Arrangement

    Medical gas supply options depend on the gas, demand, available infrastructure, and applicable requirements.

    Some applications may use approved cylinder-based source arrangements, while others may justify different centralized supply configurations.

    The selection should consider consumption, replenishment, storage, monitoring, and reserve requirements.

    Facility managers should avoid selecting a supply method based solely on initial equipment cost.

    The arrangement must support clinical demand and comply with the standards applicable to the center.

    Qualified medical gas professionals should participate in source-system planning.

    Plan Distribution Around Clinical Workflow

    Medical gas outlets and related infrastructure should be coordinated with how each clinical space will function.

    Operating rooms, procedure areas, and recovery spaces may have different equipment arrangements and access requirements.

    Designers should consider equipment placement, patient movement, staff access, and future maintenance.

    Medical gas piping and terminal units must meet applicable installation and performance requirements.

    Changes made late in the project can be costly, especially when walls, ceilings, and clinical equipment locations have already been finalized.

    Early coordination between clinical teams and engineers helps reduce those risks.

    Reserve Supply and Continuity Planning

    Medical gas continuity is important in ambulatory surgery centers because procedures may depend on uninterrupted access to specified gases and services.

    Facilities should evaluate required reserve arrangements under the applicable standards.

    Planning should also address equipment failures, supply interruptions, maintenance, and other foreseeable disruptions.

    Clinical leadership and facility personnel should establish appropriate responsibilities and response procedures.

    An ASC's smaller footprint does not eliminate the need for continuity planning.

    The correct approach depends on the system configuration and clinical services.

    Monitoring and Alarm Systems

    Medical gas systems require monitoring and alarm arrangements appropriate to the installation and applicable requirements.

    These systems help responsible personnel recognize conditions that may affect supply or distribution.

    Alarm locations and response procedures should reflect the facility's staffing and operating model.

    An ASC may have different organizational arrangements from a large hospital, making clearly assigned responsibilities especially important.

    Personnel should understand how to recognize, communicate, and respond to relevant alarm conditions.

    Monitoring equipment must be maintained and verified as required.

    Medical Gas Storage and Delivery Access

    Medical gas source equipment and cylinders require suitable storage and access.

    Facilities should evaluate available space, equipment clearances, delivery routes, and applicable safety requirements.

    Smaller healthcare sites may have limited room for dedicated storage or service access.

    That constraint should be addressed during design rather than after construction.

    The selected arrangement should allow safe replenishment, inspection, and maintenance without unnecessarily disrupting patient-care operations.

    Coordinate Installation and Verification

    Medical gas systems must be installed and verified according to applicable requirements before clinical use.

    NFPA 99 is an important standard for healthcare medical gas systems in the United States, as adopted by the relevant authorities.

    Other building, fire, healthcare, and regulatory requirements may also apply.

    The applicable edition and specific obligations depend on the jurisdiction and facility.

    Qualified professionals should perform the required design, installation, inspection, testing, and verification activities.

    Project schedules should account for these requirements before the center begins treating patients.

    Consider Future Service Expansion

    Ambulatory surgery centers may add procedures, equipment, or operating capacity over time.

    Those changes can affect medical gas demand and distribution requirements.

    Facilities should evaluate realistic growth plans during initial design.

    Potential considerations include source capacity, accessible distribution routes, and equipment space.

    However, future flexibility should be balanced against current clinical needs and sound engineering.

    The goal is infrastructure that can support planned development without unnecessary complexity.

    How nexAir Helps

    nexAir supports healthcare customers with medical gases and medical gas system capabilities, including installation, maintenance, and monitoring services.

    Through nexAir KnowHow, customers can evaluate gas supply requirements, consumption patterns, facility constraints, and operational needs.

    Early coordination helps ambulatory surgery centers plan medical gas infrastructure around their clinical services and long-term operations.

    Helping Customers Forge Forward

    Ambulatory surgery centers Forge Forward by designing medical gas systems around the care they provide.

    Appropriate source capacity, distribution infrastructure, reserve arrangements, monitoring, and qualified installation all contribute to dependable operation.

    When clinical and facility teams coordinate these decisions early, they can create an infrastructure foundation that supports safe, efficient surgical care.

    nexAir is always open!

    Don't see what you're looking for?

    Everything we offer is a click away and it will arrive before you know it.