• nexAir Now
  • Specialty Gases in Hospital and Clinical Laboratories

    Hospital and clinical laboratories rely on sophisticated analytical instruments to support diagnostic testing, research, and other healthcare activities.

    Many of these instruments require specialty gases for analytical measurements, instrument operation, or controlled laboratory processes.

    Unlike gases delivered directly for patient care, laboratory specialty gases may be selected according to analytical purity, composition, instrument compatibility, and method requirements.

    The correct gas specification can influence measurement reliability, equipment performance, and laboratory workflow.

    For healthcare organizations, specialty gas planning should address both the analytical application and the infrastructure needed to deliver the gas consistently.

    How Clinical Laboratories Use Specialty Gases

    Clinical laboratories perform a wide variety of analyses using different technologies.

    Depending on the equipment, gases may support chromatography, mass spectrometry, spectroscopy, or other analytical techniques.

    Some gases serve as carrier gases. Others support ionization, plasma generation, purging, or specific instrument functions.

    The requirements depend on the method and instrument design.

    Laboratories should identify the purpose of each gas before selecting a product or supply arrangement.

    A gas suitable for one analytical technique may not meet the requirements of another.

    Nitrogen in Clinical Laboratory Instruments

    Nitrogen is used in many analytical applications.

    Depending on the instrument, it may support nebulization, drying, purging, or other operating functions.

    Certain liquid chromatography-mass spectrometry systems use nitrogen for processes associated with sample introduction and ion formation.

    The required purity, pressure, and flow depend on the equipment.

    Laboratories should evaluate manufacturer specifications and expected consumption.

    Suitable supplied-gas or on-site generation arrangements may be considered where compatible with the instrument and method.

    Argon in Laboratory Analysis

    Argon is used in selected analytical techniques, including inductively coupled plasma applications.

    In ICP-based systems, argon may support plasma generation and other instrument functions.

    These applications can have substantial gas consumption requirements.

    Laboratories should evaluate purity, pressure, flow, and supply continuity.

    The appropriate arrangement depends on the instrument and facility infrastructure.

    Reliable argon delivery can be important to maintaining analytical schedules and instrument availability.

    Helium and Hydrogen Applications

    Helium and hydrogen may be used in certain gas chromatography and related analytical systems.

    Their suitability depends on the instrument and method.

    Gas selection can influence analytical performance, operating conditions, and equipment requirements.

    Hydrogen introduces flammability considerations that must be addressed through suitable equipment and safety procedures.

    Laboratories should not substitute one carrier gas for another without evaluating compatibility and method requirements.

    Purity specifications should be reviewed alongside the gas identity.

    Calibration Gas Mixtures

    Some laboratory instruments require calibration gas mixtures with defined component concentrations.

    These mixtures help establish or verify instrument response according to the applicable analytical procedure.

    Selection may involve concentration, balance gas, stability, measurement uncertainty, and traceability requirements.

    For certain applications, NIST-traceable mixtures or other specified reference materials may be appropriate.

    The correct documentation depends on the method and laboratory quality system.

    Calibration gas should be selected based on the complete analytical requirement rather than a concentration label alone.

    Why Gas Purity Matters

    Analytical instruments may be sensitive to trace impurities.

    Moisture, oxygen, hydrocarbons, or other contaminants can affect performance depending on the technique.

    The relevant limits vary by application.

    A high-purity gas may be sufficient for one instrument, while another requires more demanding specifications.

    Laboratories should review the complete impurity profile when necessary.

    The overall purity percentage does not always establish suitability for a sensitive analytical method.

    Separate Laboratory Gas Requirements from Patient-Care Systems

    Healthcare facilities may operate both medical gas systems and laboratory specialty gas systems.

    These systems serve different purposes and may be subject to different requirements.

    A laboratory gas specified for analytical instrumentation should not be assumed suitable for administration to patients.

    Likewise, a medical gas product should not automatically be assumed to meet the purity or impurity specifications of a particular analytical instrument.

    Facilities should identify each gas's intended use and applicable standards.

    System design and procurement should preserve the distinction between clinical patient-care applications and laboratory analytical requirements.

    Choosing the Right Supply Format

    Laboratory gas supply may involve individual cylinders, manifolded arrangements, or other suitable configurations depending on the gas and consumption.

    Low-volume applications may be practical with individual cylinders.

    Higher-volume or continuous-use instruments may benefit from different supply arrangements.

    The decision should account for purity, pressure, flow, storage, replenishment, and available infrastructure.

    Facilities should also consider whether multiple instruments can appropriately share a supply system.

    The arrangement must maintain the required gas quality at each point of use.

    Protecting Purity Through the Delivery System

    Gas quality can be compromised by unsuitable regulators, tubing, fittings, or operating practices.

    Leaks may introduce atmospheric contaminants.

    Improper cylinder changes or contaminated equipment can also affect sensitive applications.

    Laboratories should use delivery components compatible with the gas and required purity.

    Where appropriate, additional purification or monitoring may help protect instrument performance.

    The complete gas path should be considered when troubleshooting contamination or analytical instability.

    Documentation and Laboratory Quality Requirements

    Clinical laboratories may operate under accreditation, regulatory, and internal quality requirements that affect analytical materials and documentation.

    Gas specifications, certificates of analysis, and calibration records may be relevant depending on the application.

    Facilities should identify which documentation is required for each method.

    Not every specialty gas requires the same certification or traceability.

    The correct approach is to match the supplied product and documentation to the analytical procedure and applicable quality requirements.

    Planning for Laboratory Growth

    Hospital laboratories may add instruments, expand testing capacity, or introduce new analytical methods.

    These changes can affect gas consumption and infrastructure requirements.

    Facility managers should coordinate with laboratory leadership before purchasing new equipment.

    Instrument specifications can reveal requirements for gases, pressure, flow, purity, and supply continuity.

    Early planning helps identify whether existing distribution systems can support the new equipment.

    It also provides an opportunity to evaluate storage and replenishment arrangements.

    How nexAir Helps

    nexAir supplies specialty and high-purity gases, calibration mixtures, and gas-delivery equipment for laboratory and analytical applications.

    Through nexAir KnowHow, customers can evaluate gas composition, purity, documentation, and supply requirements.

    nexAir's specialty gas capabilities help healthcare laboratories identify products and delivery arrangements suited to their instruments and analytical methods.

    Helping Customers Forge Forward

    Healthcare laboratories Forge Forward by treating specialty gases as essential components of analytical operations.

    Gas purity, mixture composition, delivery conditions, and documentation all influence suitability.

    When laboratory and facility teams coordinate these requirements, they can support reliable instrumentation, efficient workflows, and dependable analytical results.

    nexAir is always open!

    Don't see what you're looking for?

    Everything we offer is a click away and it will arrive before you know it.